• QuickStart set-up enabling 'out of the box' operation
• Expert configuration via PC wizard with online help
• Quick and easy commissioning - no need for expert knowledge
• Clear information of process with scrolling, custom messages
• Custom alarm messages for easy understanding
• Recipe selection from operator interface
• Internal timer and setpoint programming
• Instant indication of heater faults with integral ammeter
• Remote setpoint - solution for multi-zone applications

The emphasis is on simplicity and ease of use.  A simple 'QuickStart' code can be used to configure all the functions essential for controlling your process.  This includes input sensor type, measurement range, control options and alarms - making 'Out of the Box' operation truly achievable.  If you prefer, you can specify what you need at point of order and we will ship the unit preconfigured to your requirements.

In operator mode every parameter has a scrolling text message describing its function and is available in English, German, French, Spanish or Italian.  More advanced features are configured using Eurotherm iTools, a PC based configuration wizard which is easy to use and an instructive guide to all the functions in the controller.

• Reliable performance and accuracy
• Simple operation
• Internal timer - a 5 mode timer suitable for simple time based profiling applications
• Universal input - 9 thermocouple types, PT100, DC linear and a downloadable custom curve
• Three internal alarms
• Up to two relay outputs
• One logic input or output

A universal input enables selection of nine internally stored thermocouple types and the PT100 resistance thermometer.  Other input linearizations may be factory downloaded.  Linear inputs can be scaled to the desired display range.
Two outputs are configurable for heating, cooling or alarms.

Three internal alarm setpoints are provided - configurable as high, low or deviation alarms.  Alarms can be 'blocked' on start-up to prevent unnecessary operator alerts.

Heater failure can be detected using PDSIO when the controller is used with a TE10S Solid State Relay - this negates the need to use extra components such as current transformers.

The operator interface can be customized to present only those parameters that an operator needs to see and adjust, while other parameters are locked away under password protection.

A five mode timer is provided for simple, time-based profiling applications.

The 2216e, 2208e and 2204e are versatile, high stability temperature / process controllers, with self-tuning, in 1/16, 1/8 and 1/4 DIN sizes.

• Versatile, high stability temperature or process controllers
• Self-tuning with overshoot inhibition
• Heating and cooling outputs
• Modular hardware
• Customized operator display
• Digital communications

The hardware is configurable for heating, cooling or alarms.  All instruments are fully configurable on-site.

Modular heating and cooling outputs are provided with a choice of one or two alarm relay outputs.  The 1/8 and 1/4 DIN units have two digital inputs to select auto/manual transfer, standby mode, second setpoint or alarm acknowledge.

Digital communications with industry standard protocols - including Modbus and DeviceNetTM communications - are available for easy connection to supervisory control and data logging systems.

Simple heat treatment profiles can be programmed using the internal ramp generator and dwell timer.

Remove the need for ammeters by using the advanced load current monitoring facility.  Heater current may be displayed and open or short circuit faults detected.