HI SP7 Stainless Steel Single Point Load Cell

The Hardy Process Solutions HI SP7 single point load cell is designed for gas cylinder scales, bench and floor scales, conveyor scales, check weighers, packing machines, and industrial process control. Its polished stainless construction and hermetic sealing make it a fantastic fit for sanitary food and beverage applications. These sensors feature C2® calibration capabilities and come with three meters (9-10 ft) of cable.

The HI SP7 is polished 17-4PH stainless steel with complete hermetic sealing. With IP68/ IP69K, the HI SP7 is a perfect fit for use in harsh industrial environments. With a wide range of capacities from 100kg (220lb) to 550 kg (1.1Klb), it is an ideal fit for many industrial packaging applications.

HI SP1 and HI SP6 Stainless Steel Single Point Load Cells

Hardy’s ADVANTAGE® Single Point Load Cells are designed to provide exceptional performance in a safe and predictable manner. Predominantly used in packing and OEM applications, this line of precision load cells comes with quick, easy and accurate C2® electronic calibration.

They are also ideal for bench scales, which require a low sensitivity to off center loads. They are built to perform in the harsh environments found in the food, chemical and allied industries.

The sensors are 17-4 PH stainless steel, with C2® calibration capabilities and come with three meters (9-10 ft) of cable.

The HI SP1 is available in capacities from 7.5kg to 200kg (16.5 to 440lbs).  Each is environmentally protected with a plastic covering to IP67 (IP65 for 7.5 and 10kg) and have an integral mounting spacer.

The HI SP6 is available in capacities from 10kg to 200kg (22 to 440lbs), are completely hermetically sealed to IP68 and IP69.  They also have an integral mounting spacer.

HI SPB1 and HI SPA60 Brick Type Single Point Load Sensors

The Hardy Process Solutions brick type series of single point load cells are designed for the OEM, conveyor and bench scale markets which require accurate measurements during off-center load conditions. They are built to perform in industrial packaging, dispensing, and dosing applications. These sensors feature C2® calibration capabilities and come with three meters (9-10 ft) of cable.

The HI SPB1 is a 17-4PH stainless steel single point load cell with complete hermetic sealing. It is ideal for bench and floor scales, conveyor scales, check weighers, packing machines, and industrial process control. With IP68/IP69K, the HI SPB1 is a perfect fit for use in harsh industrial environments. With a wide range of capacities from 50 kg (110lb) to 1,000 kg (2.2Klb), it is highly resistant to impacts and features an integral mounting spacer. It supports a maximum platform size up to 1 000 x 1 000 mm.

The HI SPA60 is an aluminum brick type single point load cell with improved potting. It features a wide range of capacities from 30 kg to 750 kg and features IP67 environmental protection. The maximum platform size it supports is 600 x 600mm

HI SPA42 and HI SPA22 Single Point Load Sensors

The Hardy Process Solutions HI SPA Series of aluminum single point load cells are designed for the OEM, conveyor and bench scale markets, which can accommodate off center loads. They are built to perform in industrial packaging, dispensing, and dosing applications. These aluminum sensors come standard with C2® calibration capabilities.

The HI SPA42 comes in capacities from 11lbs to 440lbs (5kg to 200kg), are environmentally ratedat IP67 and have improved potting. The HI SPA42 has 3 meters of cable (9.8 ft.).

The HI SPA22 is available in capacities from 11lbs to 88lbs (5kg to 40kg), are environmentally rated at IP67 and have improved potting. The HI SPA22 has 2 meters of cable (6.5 ft.).

HI SPAL04 and HI SPL Ultra Low-Capacity Single Point Load Cells

The Hardy Process Solutions HI SPAL04 and HI SPL Series of aluminum ultra-low capacity, single point load cells are ideal for packaging machines, dosing/filling, belt scales/conveyor scales, in-motion checkweighers, and retail scales/counting scales for sensitive low-weight materials, such as pharmaceuticals and minor ingredients.

The HI SPAL04 comes in capacities of 300 grams to 3 KG (.667 lb to 6.6 lb) with an IP rating of IP66. It is great for use under platforms up to 8” x 8”.

The HI SPL is available in capacities from 600 grams to 3 kg (1.6 lb to 6.6 lb) and also features a rating of IP66. It is ideal for use under platforms up to 16” x 16”.

Both families feature improved potting.