Options Purchased with Unit |
|
AC |
AC Power supply ordered with 4050 or 4060 unit |
|
DC |
DC Power supply ordered with 4050 or 4060 unit |
|
N1 |
No internal connections |
|
EIP |
EtherNet/IP |
|
PFN |
PROFINET Communications |
|
MD |
Modbus TCP/IP |
|
ROC |
Rate-of-Change (4050 only) |
|
NTEP |
NTEP (adds front label--4050 only) |
|
N2 |
No External Network |
|
DN |
DeviceNet (ordered with unit) |
|
4ANA |
Four Channel Analog (Network Slot)++ |
|
PB |
Profibus Interface (ordered with unit) |
|
N3 |
No Aux Option |
|
4ANB |
Four Channel Analog (Option Slot)++ |
|
DIO |
Digital I/O (3 in; 4 out) (DRWS, PMWS only) |
|
N4 |
No Summing Card. Includes 4 glands; 4 seals (DRWS, PMWS only) MUST select if NO summing card |
|
IT1 |
INTEGRATED TECHNICIAN Summing card (DRWS, PMWS only) |
|
IT2 |
INTEGRATED TECHNICIAN Summing card with Trim Pots*** (DRWS, PMWS only) mTrim Pots cannot be used with C2 |
|
JB1 |
Standard Summing Card (DRWS, PMWS only) |
|
JB2 |
Standard Summing Card with Trim Pots*** (DRWS, PMWS only) Trim Pots cannot be used with C2 |
|
|
|
Options Purchased with Unit |
|
PM |
Mounting frame & gasket for Blind Remote (3030R or 3010R) ONLY |
|
SA |
Stand alone includes Nema 4X/IP66 Rear cap, mounting bracket & 2 cable grips |
|
MB |
Swivel mounted includes bracket & hardware |
|
AA |
120/240 VAC for HI 3030 with 4 AC output Relays |
|
AA7 |
120/240 VAC for HI 3030 with 7 AC output Relays |
|
DA |
12-24 VDC for HI 3030 with 4 AC output Relays |
|
DA7 |
12-24 VDC for HI 3030 with 7 AC output Relays |
|
LC |
HI 3010 or HI3030 Single Scale single Load cell or summed load cell input |
|
JB |
HI 3010 Four Load Cell input (Single scale) |
|
SD |
HI 3010 Four load cell input with Smart Diagnostics (Single scale) |
|
2S |
HI 3030 Dual Scale input |
|
4S |
HI 3030 Four Scale Input |
|
SD |
HI 3030 Four load cell input with Smart Diagnostics (Single scale) |
|
OO |
Option Slot 1 No Option (OPTION SLOT COVER PLATE) |
|
CN Option Slot 1 |
Option Slot 1 ControlNet |
|
PB |
Option Slot 1 Profibus |
|
2AN |
Analog dual channel (option slot 1 or 2) |
|
OO |
Option Slot 2 No Option (OPTION SLOT COVER PLATE) |
|
EIP |
EtherNet/IP (slot 1 or 2) |
|
DN |
DeviceNet (Included with HI 3010 optional on HI 3030 only) |
|
ROC3030 |
Rate-of-Change Mode (HI 3030 only) |
|
NTEP |
NTEP (HI 3030 only) |
|
CWM |
Measurement Canada (HI 3030 only) |
|
|
|
Options Purchased with Unit |
|
A1 |
Control Output Configuration RS 232 (full duplex) |
|
A2 |
Control Output Configuration RS422 (full duplex) |
|
A3 |
Control Output Configuration RS485 (half duplex) |
|
B1 |
Analog Output |
|
B2 |
BCD, Tri-Stated, 37 pin D-submin |
|
B5 |
BCD, 60" cable |
|
B8 |
AB Remote I/O Interface |
|
B12 |
Profibus Interface |
|
C1 |
Peak Hold |
|
C6 (Totalizer) |
HI2151/30WC Totalizer (-C6) |
|
D1 |
Six TTL Outputs (connector and 60" cable) |
|
D2 |
Six Relay Outputs, Card (60"cable) |
|
E2 |
240 VAC, 50/60 Hz Operation |
|
E3 |
NTEP Certification Kit |
|
E4 |
Portable Display (for blind remote) |
|
F2 |
NTEP for wall mount |
|
F8 |
Intrinsic Safety Barrier kit for ADVANTAGE load sensors |
|
F9 |
Intrinsic Safety Barrier kit for Hardy old style load cells |