CTH Controls Inc.
1.888.550.6829   Supplier Inquiry   About Us      
Eurotherm Action Instrument
Eurotherm Power Control
Eurotherm Power Control
Eurotherm Action Instrument
Eurotherm Chessel
Hardy Process Weight
Hardy Process Weight
London Electronics Ltd.
Paragon Robotics
Ohio Semitronics
Dimetix Inc.
TandD Data Loggers
Ametek Dixson
Nortech Engineering
Precision Digital
Process Sensors Corp
Ultra Electronics
Action VisiPak™ V560 Loop Powered LCD Indicator

Provides a 3-1/2 Digit Liquid Crystal Display (LCD) in Proportion to a 4-20mA Current Input.

  • Eliminates Extra Power Supply
  • LCD Readable from 30ft.
  • Switch Selectable mA Inputs and Decimal Points
  • Field Configurable Wide Ranging Display
  • NEMA 4 Front Panel
  • Readings to ±19990
  • FM & CSA Safety Approval for Hazardous Installations


The V560 is a loop powered digital process indicator which derives its power entirely from the 4-20mA or 10-50mA signal being measured. No local power is required at the point of measure- ment. A large, 3? digit, 0.8" high LCD provides clear visibility and can be quickly and easily calibrated to the required range. Zero can be adjusted to±1999 counts with a span of 100 counts or greater. The trailing "dummy" zero allows display readings to ±19990. The decimal point position is switch selectable and can be independently set to any of 4 positions (1. 9. 9. 9. 0).

The V560 is useful in any application requiring a wide ranging 3? digit display from a 4-20mA or 10-50mA current source. The standard NEMA 4X housing enables indoor or outdoor installation with protection from sleet, corrosion, moisture, chemicals, and even hose directed water or severe condensation. The V560 is ideal for displaying process variables such as temperature, pres- sure or flow, in local and remote areas where line power is either impractical or not availableR. efer to the V565 High-Performance LCD indicator for 1.00 Volt loop-drop and square root selection.

The V560 is FM/CSA approved for intrinsically safe operation in Class I, Division 1, Groups A, B, C, & D hazardous locations when connected in accordance with manufacturer's drawing 790-0024(FM) or 790-0025(CSA).

Click here for the complete information in .pdf format


CTH Controls Inc.   CTH Controls Inc.
5100 South Service Road, Unit 2
Burlington, ON. L7L 6A5 Canada
Phone: 905-792-6829
Toll Free: 1-888-550-6829
Fax: 905-792-6902
  arrow Line Monitoring arrow Contact Us  

For Secure Payments
Mastercard Visa
<empty> <empty> <empty>
<empty> <empty> <empty>
  arrow Products arrow Supplier Inquiry  
  arrow Services arrow ISO Certification  
  arrow Support arrow Return Policy  
  arrow About Us arrow Careers  
  arrow Line Card  
© Copyright 1998-2022, CTH Controls Inc. All rights reserved