|
Description
Model AP4003-0001 is the new
version of the previous AP4003-xxxx
series. Wide-ranging technology
from the Ultra Slimpak II series
has been utilized in this new
version. This single model contains
all of the input capability
of previous dash numbers without
the need for custom ranging
from the factory. The resistance
range is still 100 to 100k ohms.
The default range is 0 to 100%
but any portion of the span
from 10% to 100% can be selected
by pushbutton ranging. Four
output ranges (0-5VDC, 0-10VDC,
0-20mA and 4-20mA) are available.
A 15VDC output can also be used,
but at a reduced drive level
of 3mA. The default output is
4-20mA.
|
 |
Applications
The AP4003-0001 is useful for
converting potentiometer settings
to voltage or current. It can
be used anywhere a potentiometer
or slidewire is used to determine
position, displacement or rotation.
The constant-voltage excitation
allows use with potentiometers/slidewires
with total resistances from
100 ohms to 100k ohms without
affecting accuracy. For additional
information on calibration,
operation and installation,
contact our Technical Support
Group.
|
